Wilston timber floor sanding by Brisbane’s third-generation specialists. Wilston is a quiet inner-north Brisbane suburb defined by its 1900s–1940s Queenslanders and post-war character homes. Most floor sanding jobs we quote here involve original hardwood that’s been in homes for 80+ years. Quality Floors by Max Francis have been restoring Brisbane’s timber floors since 2000 — ATFA Member #98, QBCC Licence #64691. Free written quotes for Wilston homes.
About Wilston timber floors
Wilston (4051) sits about 4km north of the Brisbane CBD, with a village feel anchored by Wilston Village shops and the Newmarket Pool. Streets like Kedron Brook Road and Macgroarty Street are lined with well-preserved Queenslanders, post-war character homes, and a smaller number of 1990s renovations. The suburb is family-friendly with strong demand from buyers wanting inner-city access plus heritage character. Newmarket and Grange neighbour to the north and west; Albion sits east toward the river.
Most Wilston jobs we quote involve original Queenslander hardwood, ironbark and turpentine (older homes), hoop pine in some 1920s homes, Tasmanian oak in 1990s renos — the dominant timber species in this part of Brisbane. Wilston’s timber stock is among Brisbane’s most consistent for heritage character — many original boards are intact with minimal previous sanding. Working carefully here matters more than working fast.
Floor sanding services in Wilston
We offer the full range of timber floor services for Wilston homes:
- Floor sanding and polishing — full sand-and-refinish of existing timber floors, dust-controlled equipment, choice of water-based polyurethane, solvent-based polyurethane, or hard-wax oil finish.
- Timber floor repairs — board replacement, water damage, pet-stain restoration, gap-filling. Read more on our timber floor repairs page.
- Deck sanding and restoration — including our Blitz wire-brush machine for tough deck timber. Deck restoration details here.
- Floor polishing — including screen-and-recoat for floors that need a refresh without a full sand. Floor polishing details.
- New floor finishing — sanding and finishing newly installed timber to ATFA specification.
Common Wilston floor sanding jobs
Working in Wilston regularly means we know what to expect. The most frequent jobs we quote here:
- Pre-1940s Queenslander restoration — Original hardwood with face-fixed nails, occasional gum vein, and decades of natural patina. Heritage-respectful sanding sequence and finish choice.
- Post-war character home floors — 1940s–50s homes often used hoop pine — a softer timber than hardwood, sands fast but easy to over-sand. We measure remaining thickness before quoting.
- 1990s renovation refresh — Tasmanian oak overlays from 1990s upmarket renos that are now ready for sand-and-refinish. Water-based polyurethane keeps the pale character that suits the timber.
- Stair and landing restoration — Wilston Queenslander stairs are often feature pieces. We sand stairs to a slightly different sequence for grip on treads while preserving the heritage profile.
Whatever your floor’s condition, we’ll tell you honestly on inspection whether sanding is the right call, whether a screen-and-recoat (a lighter surface refresh) is enough, or whether board replacement is needed first. Read more about whether your specific floor can actually be sanded.
Why Wilston homeowners choose Quality Floors
- Local Brisbane specialists — based at 20 Ryhill Road, Sunnybank Hills, 30 minutes from Wilston. Same-week quote turnaround.
- 25+ years of Brisbane timber experience — Max Francis founded the business in 2000; his son Kyle is the third generation.
- Dust-controlled sanding — industrial extraction at source, HEPA-grade filtration. Cleaner home during the job, better finish quality.
- ATFA Member #98 and QBCC Licence #64691 — fully credentialed, fully insured. Verify both online before any quote.
- Free written quotes — on-site inspection, no surprises on day 1.
- Honest assessment — if your floor isn’t worth sanding, we’ll tell you. We don’t sand engineered floors that are too thin to take it.
Brisbane climate considerations for Wilston floors
Wilston’s leafy streets and inner-north location offer moderate UV exposure, but 100-year-old timber floors are sensitive to humidity swings. For most Wilston homes we recommend water-based polyurethane in matte or satin — stays clear over time, low VOC, dries fast, UV-stable. Read our full Brisbane finishes guide for the trade-offs.
Areas we cover near Wilston
Wilston is one of many Brisbane suburbs we service. Our same-week service area includes neighbouring Newmarket, Grange, Windsor, Lutwyche, Albion, plus the rest of Brisbane and broader South-East Queensland. Travel to suburbs further out (Gold Coast, Sunshine Coast) is available for larger jobs — see our SE Queensland regional guide.
About Quality Floors by Max Francis
Quality Floors by Max Francis is a third-generation family-owned timber flooring business serving Brisbane and South-East Queensland since 2000. Based at 20 Ryhill Road, Sunnybank Hills (4109), we operate across all Brisbane suburbs from the CBD to outer ring.
- Owner: Max Francis — 25+ years’ experience in floor sanding and polishing
- Second-generation: Kyle Francis
- Memberships: ATFA Member #98 (Australian Timber Flooring Association)
- Licence: QBCC #64691
- ABN: 83 413 160 375
- Reviews: 5.0 stars on Google (50+ reviews)
Frequently asked questions about Wilston floor sanding
Do you cover Wilston and surrounding inner-north suburbs?
Yes — Wilston is a regular service suburb for us, along with Newmarket, Grange, Windsor, Lutwyche, and Albion. Travel from our Sunnybank Hills office is about 30 minutes; we typically schedule inner-north jobs same-week with no travel surcharge.
How much does floor sanding cost in Wilston?
Floor sanding in Wilston typically costs $25–40 per square metre, depending on floor condition, finish chosen, and access. An average Wilston home of around 100m² timber area would be $2,500–4,000 for a full sand-and-refinish. Read our full Brisbane cost guide for breakdown.
How long does floor sanding take in a Wilston home?
A standard Wilston home takes 2–3 days on site: day 1 sanding, day 2 primer and first poly coat, day 3 final coat. Furniture can return after 5 days for water-based polyurethane (light items) or 7 days (heavy items). Solvent-based finishes need 7 full days before furniture goes back.
Do you offer dust-controlled floor sanding in Wilston?
Yes — every Wilston job uses our dust-controlled sanding equipment with industrial extraction at source and HEPA-grade filtration. No system is 100% dust-free, but our setup captures 90%+ of dust at the sander head, keeping your home cleaner during the job.
Are you licensed and insured for work in Wilston?
Yes. QBCC Licence #64691, ATFA Member #98, full public liability insurance. You can verify both credentials online — QBCC at qbcc.qld.gov.au and ATFA at atfa.com.au. We carry $20m+ public liability cover for every Brisbane job.
Get a free written quote for your Wilston floor sanding job
Phone Max on (07) 3345 2097 or 0411 883 249. Or use the online contact form and we’ll respond within 24 hours.
On-site inspection takes 20–30 minutes. We’ll measure your floor, assess the timber condition, recommend the right finish for your home and lifestyle, and give you a written quote on the spot. No pressure, no follow-up calls if you choose not to proceed.
About the author: Max Francis is a third-generation timber flooring specialist with 25+ years’ experience, ATFA Member #98 and QBCC Licence #64691. He founded Quality Floors by Max Francis in 2000 and works with his son Kyle to restore Brisbane’s timber floors using the latest dust-controlled sanding equipment. Read more about our team and credentials.