Deck Restoration Brisbane — Expert Timber Deck Sanding & Refinishing

Is your timber deck looking worn, grey, or splintered? Quality Floors by Max Francis provides professional deck restoration in Brisbane and South East Queensland. With over 30 years of experience and our advanced Blitz Wire Brush Machine technology, we restore weathered timber decks to their original beauty — safely, efficiently, and with results that last.

As QBCC licensed (#64691) and ATFA members (#98), we bring trade-level expertise to every deck restoration project across Brisbane. Whether your deck needs a light sand and re-oil or a full strip-back and refinish, our team has the skills and equipment to handle it.

Call Max on 0411 883 249 for a free deck assessment, or phone our office on (07) 3345 2097.

Why Brisbane Decks Need Professional Restoration

Brisbane’s subtropical climate is tough on outdoor timber. The combination of intense UV exposure, heavy summer rain, high humidity, and occasional hail takes a serious toll on unprotected decking. Without regular maintenance, timber decks can develop:

  • Greying and discolouration — UV breaks down the lignin in timber, turning it grey
  • Splintering and surface roughness — moisture cycling causes timber fibres to lift
  • Mould and mildew growth — Brisbane’s humidity creates ideal conditions for fungal growth
  • Cupping and warping — repeated wet-dry cycles cause boards to distort
  • Coating failure — old oils and stains peel, flake, or wear away over time

Professional deck restoration addresses all of these issues, bringing your deck back to a safe, beautiful, and protected state.

Our Deck Restoration Process

Step 1: Assessment

We inspect your deck to evaluate the timber condition, identify any structural issues, and determine the best restoration approach. This assessment is free and comes with an obligation-free quote.

Step 2: Preparation & Repairs

Before sanding begins, we address any structural issues — replacing damaged boards, punching down protruding nails and screws, and treating any areas affected by rot or termite activity.

Step 3: Deck Sanding

Using our specialised equipment — including the Blitz Wire Brush Machine — we sand the deck surface to remove the old coating, grey timber, and surface imperfections. The Blitz machine works around dome-head nails and screws without catching, which is a common problem with standard drum sanders.

Step 4: Coating & Protection

Once sanded back to clean timber, we apply your chosen protective coating. For Brisbane decks, we typically recommend high-quality decking oils that penetrate the timber and provide UV and moisture protection.

Types of Timber Decks We Restore

  • Merbau (Kwila) — one of the most popular decking timbers in Brisbane
  • Spotted Gum — tough Australian hardwood with excellent wear resistance
  • Blackbutt — versatile hardwood popular in Queensland
  • Treated Pine — responds well to sanding and re-oiling
  • Ironbark — extremely hard timber requiring specialist equipment
  • Tallowwood — naturally oily timber with excellent outdoor durability

The Blitz Machine Advantage

Quality Floors uses the Blitz Wire Brush Machine — a specialised piece of equipment that sets us apart from other deck restoration services in Brisbane:

  • Works safely around dome-head nails and screws without catching or tearing
  • Removes old coatings and grey timber without excessive material removal
  • Creates a textured surface profile that helps new coatings penetrate and bond
  • Reduces dust compared to traditional belt sanders
  • Handles the gaps between deck boards that trip up conventional sanders

Deck Restoration Cost in Brisbane

The cost of deck restoration in Brisbane depends on several factors:

  • Deck size — measured in square metres
  • Current condition — a lightly weathered deck costs less to restore
  • Timber type — harder timbers require more sanding time
  • Repairs needed — board replacement and structural work adds to the cost
  • Coating choice — premium decking oils offer better protection and longevity
  • Access — elevated or difficult-to-access decks may require additional setup

We provide free, obligation-free quotes for all deck restoration work.

When to Restore vs Replace Your Deck

Restoration is usually the better option when:

  • The timber is structurally sound (no significant rot or termite damage)
  • The boards are thick enough to sand (at least 15-18mm remaining thickness)
  • The substructure (bearers and joists) is in good condition
  • The deck layout and design still meets your needs

We’ll always give you an honest assessment during our free inspection.

Brisbane-Wide Deck Restoration Services

Quality Floors provides deck restoration across Brisbane and South East Queensland, including Brisbane CBD, South Brisbane (Sunnybank Hills, Logan, Redlands), North Brisbane (Chermside, Aspley, Pine Rivers), East Brisbane (Cleveland, Capalaba, Wynnum), and West Brisbane (Ipswich, Kenmore).

Frequently Asked Questions

How do you restore a weathered deck in Brisbane?

Professional deck restoration involves four steps: assessment, preparation and repairs, sanding to remove old coatings and grey timber, and applying a protective coating such as decking oil.

Is it better to sand or strip a deck?

For most Brisbane decks, sanding is the preferred method. Sanding provides a cleaner surface profile that helps new coatings bond better. Our Blitz Wire Brush Machine is particularly effective at removing old coatings without excessive timber removal.

How much does deck restoration cost in Brisbane?

The cost varies depending on deck size, timber type, current condition, and the coating chosen. Contact Quality Floors on (07) 3345 2097 or 0411 883 249 for a free, obligation-free quote.

Can you restore old decking?

Yes, in most cases. As long as the timber is structurally sound and thick enough to sand, even heavily weathered decks can be restored to near-new condition.

How often should I have my deck re-oiled in Brisbane?

In Brisbane’s climate, most decks benefit from re-oiling every 12 to 18 months. North-facing decks with full sun exposure may need more frequent maintenance.

What is the best oil for decks in Brisbane?

The best oil depends on your timber type and desired appearance. We can recommend the most suitable product during our free assessment.

Do you restore commercial decking areas?

Yes. Quality Floors handles deck restoration for both residential and commercial properties, including restaurants, cafes, and commercial outdoor areas across Brisbane.

How long does deck restoration take?

Most residential deck restorations are completed within one to three days, depending on the deck size and scope of repairs needed.

Get Your Free Deck Assessment

Ready to transform your weathered deck? Quality Floors by Max Francis has been restoring Brisbane’s timber decks for over 30 years. As a family business with QBCC licensing (#64691) and ATFA membership (#98), we stand behind every job with quality workmanship and honest advice.

Call Max on 0411 883 249 or phone our office on (07) 3345 2097 to arrange your free, no-obligation deck assessment. We service all areas across Brisbane and South East Queensland.

Where we service Deck Restoration across Brisbane

Our deck restoration brisbane service covers all of Brisbane and South-East Queensland. We routinely work in Paddington, Bardon, New Farm, Bulimba, Hamilton, Kenmore, Sunnybank Hills, Coorparoo — plus all other Brisbane suburbs from the CBD to outer ring. Same-week scheduling, no travel surcharge for standard Brisbane jobs.

Why Brisbane homeowners choose Quality Floors

  • 25+ years’ Brisbane timber experience — Max Francis founded the business in 2000; his son Kyle is the third generation.
  • ATFA Member #98 — Australian Timber Flooring Association. Verifiable at atfa.com.au.
  • QBCC Licence #64691 — fully licensed Queensland builder. Verifiable at qbcc.qld.gov.au.
  • $20m+ public liability insurance — certificate provided on every job.
  • Free written quotes — on-site inspection, no surprises.
  • Honest assessment — if your floor isn’t worth sanding, we’ll tell you.
  • Dust-controlled sanding — industrial extraction at source plus HEPA-grade filtration.

Helpful Brisbane floor sanding guides

For more on the deck restoration brisbane service:

Frequently asked questions about Deck Restoration Brisbane

What’s the Blitz wire-brush machine?

Specialist deck-restoration tool with rotating wire-brush head. Removes weathered grey layer from hardwood faster than disc sanding, cleans T&G grooves.

Can my deck be restored or does it need replacement?

If boards are structurally sound, restoration is right. 20–30% of replacement cost, gets you another 10+ years.

How often should I oil my Brisbane deck?

Annual coat before storm season (September) is standard. High-UV positions may benefit from twice-yearly.

Can I use indoor polyurethane on my deck?

No. Indoor polyurethane is film-forming; outdoor UV destroys it. Decks need penetrating UV-stabilised oils.

How long does Brisbane deck restoration take?

Typical 30–50m² deck: 2–3 days. Foot traffic OK 24 hours after final coat; full cure 5–7 days.

Get a free written quote for your Brisbane deck restoration brisbane job

Phone Max on (07) 3345 2097 or 0411 883 249. Or use the online contact form and we’ll respond within 24 hours.

On-site inspection takes 20–30 minutes. We’ll measure your floor, assess the timber condition, recommend the right approach for your home, and give you a written quote on the spot.

About Quality Floors by Max Francis: Third-generation timber flooring business serving Brisbane and South-East Queensland since 2000. ATFA Member #98 · QBCC Licence #64691 · ABN 83 413 160 375 · 5.0 stars on Google (50+ reviews). Based at 20 Ryhill Road, Sunnybank Hills QLD 4109. Read more about our team and credentials or visit our Brisbane floor sanding homepage.